How to reduce fuel consumption for a solid fuel boiler?

Tariffs for gas heating force us to look for an alternative. As a rule, the choice falls on a solid fuel boiler. And for it to be effective in terms of saving money on heating, it is important to carefully consider the choice of fuel. And here the question often arises of how to reduce fuel consumption for a solid fuel boiler.

Depending on the model of boiler you choose, you also choose the fuel that is most suitable. For example, firewood, pellets, coal, wood chips, briquettes. It is important to take into account the caloric content of the fuel, its moisture content and fraction.

Let's take a look at why fuel costs may be rising.

Causes of increased fuel consumption in a solid fuel boiler

The main reasons include:

1. Incorrect design.
2. Technical errors in the installation of boiler equipment.
3. Incorrect calculations of the connection scheme.
4. Mismatch of the parameters of the selected boiler model and its capacity to the specified room.
5. An uninsulated house, a house.
6. No forced ventilation.
7. Failure to maintain equipment in a timely manner.
8. The occurrence of air jams.

From the first months of heating, you can already see the difference, whether there are savings on heating costs. And at the same time, the following question arises.

How to reduce fuel consumption: recommendations from the manufacturer

If a boiler has already been selected and installed in the system, then most likely there is no question of redesign. It is costly. In this case, we suggest considering other solutions:

• You can install a draft regulator on the chimney.
• Use dry wood that has a high level of efficiency. Choose dense wood. For example, beech, hornbeam, acacia, birch, maple, oak, pear, and apple.
• Stacking firewood also affects the duration of burning. Therefore, you can try several options and find the best one for yourself.
• Do not use waste or garbage as fuel. This leads to clogging of the system and reduces thrust, increasing fuel consumption.
• Install a storage tank. This significantly saves energy. It also allows you to use it instead of a boiler, which is very beneficial. And in this case, take care of its thermal insulation.
• Install automation.
• Remove soot from the boiler in time.
• Insulate the room if you haven't done so before.

As they say, there is always something to work on.

Let's look at options for increasing the efficiency of equipment.

How to increase boiler efficiency?

The heat exchange rate affects heating losses. Therefore, it is worthwhile to install supply ventilation in the room.

• Roof insulation will improve heat retention by 25-30%.
• Insulation of floors, walls and high-quality window sealing will help to save 15% more.
• The presence of automation regulates the correct operation of the equipment.

It is best to take into account all the nuances and make calculations at the planning stage. Therefore, involve specialists and study the information in advance! It will definitely save your resources!