Maintenance of Altep boilers with automatic fuel supply

Each automated Altep fuel-fed boiler has a coal bunker.
The hopper capacity for 25-45 kW models is enough for continuous operation of the boiler for a week, depending on the heat load and the outside temperature.

At the beginning of the heating season, you should:

• fill the bunker with coal;
• light the boiler once;
• check the boiler's performance, after which it switches to automatic operation. The boiler is usually fired up at the beginning of the heating season;
• add fractional coal from bags to the bunker about 2 times a week;
• pour out the ash from the sad ash box.

Once a week, the boiler is cleaned from the inside using the tool supplied with the boiler. The convenient boiler door located on the front wall simplifies this procedure as much as possible. The design of the heat exchanger helps to minimize soot deposits inside the boiler.

Once a year, the chimney draught and patency are checked.